serpent
RAILS: Low to Medium
FINS: FCS 2 x 3 Fins
CONCAVE: Single
TAIL SHAPE: Round Square
ROCKER: Average to Full
SUITS: 2-6ft good waves
Description

Description

The Serpent model is our young gun team rider Zac McMahons signature model … Zac an explosive surfer in the water but a super chilled cat on land.

He holds a keen eye for detail and a curiosity to board design and what he puts under his feet.

The first board we threw under Zac’s feet that he gelled with straight away was the Donkey, hence why the Serpent model is heavily influenced by the Donkey model.

Although trimmed down in key areas to create an all round high performance board for those surfers chasing a bit more bite and hold in punchy pockets.

Showcasing a very similar rocker profile to the Donkey, the Serpent maintains the same versatility and is suited to a wide range of waves.

The concave is a slight single on entry, then getting deeper through the middle, with its deepest point between the feet and fins then fading out to a very subtle single concave on exit. This is our tried and tested bottom contour for all of our all round performance shapes.

The plan shape or outline is more streamlined than the Donkey.

We used the same outline but simply narrowed everything up, pulling in the nose and tail area equally in comparison to the middle. The Serpent outline sits roughly in the middle of our two other all round high performance short boards the Zippo and The Bam Bam 2.

The rail is a very forgiving medium to low, foiled out perfectly nose and tail.

The perfect rail for high performance surfing in critical sections…. Plenty of bite and hold so you can feel confident laying into an open face carve or driving off the bottom eyeing of big sections!

The Serpent excels in waves anywhere from 2-6ft and will suit most tail types. It comes standard with a pulled in round square but try it with a round pin tail if you are looking to ride the Serpent as your board for pumping waves over 4-6ft.

Available Options

SizeWidthThicknessVolume 
5'6"18 3/16"2 3/16"22.6custom order
5'7"18 3/8"2 1/4"23.8custom order
5'8"18 9/16"2 5/16"25custom order
5'9"18 3/4"2 3/8"26.2custom order
5'10"18 15/16"2 7/16"27.6
5'11"19 1/8"2 1/2"28.8
6'0"19 5/16"2 9/16"30.3
6'1"19 1/2"2 5/8"31.7
6'2"19 11/16"2 11/16"33.3
6'3"19 7/8"2 3/4"35custom order
6'4"20 1/16"2 13/16"36.5custom order
6'5"20 1/4"2 7/8"38custom order
6'6"20 7/16"2 15/16"39.7custom order

You can also build a custom with the help of JR himself with Custom Co-lab – add in some of your details and he’ll call you to talk through nailing your new sled.

Order total:

$845.00

Available in PU Glass or Tri-Flex EPS Epoxy

Available in PU Glass
Or Tri-Flex EPS Epoxy.
NOTE: Tri-Flex adds $200.

Boards in stock will be shipped in within 3 business days.

Custom Orders:
PU – note there is a 4 week build + shipping.
TRI-FLEX: note there is a 5-6 week build + shipping.

Shipping times vary based on your location.